Iveco Strallis 6 X 4 Scale Model

The Dimensions of the Horse are (L) 575mm (H) 320mm (W) 220mm. When completed the horse will have two flat bed trailers as well. The timber used Meranti,  Baltic pine and Canadian Beech

Side view showing the bottom half of the cab

Underside engine detail and prop shaft still to be added

The fith wheel actually works hooking and un hooking the trailer



Update 64 Gun French Galleon second layer hull planking

At long last, I have started the second layer of hull planking. Cutting the thin strips of timber presented quite a few challenges, namely the risk of trimming off the tips of one's fingers, beleive me I know all about this as I have had the misfortune to trim off  the tips of both my middle fingers, my left on my table saw about 12 years ago and the right about four months ago on the radial arm saw. I overcame this challenge by building a very simple jig to firmly hold the timber while cutting, it works rather well reducing the risk of serious injury, as some of you might know a radial arm saw can be extreemly dangerous. The radial arm saw I own was purchased from a gent who lost four fingers with the saw, his misfortune induced an urgent sale of the machine, greatly reducing his interest in wood working machinery.

Second layer of teak planking the lower half of the hull will be beech

"The cutting jig" with timber to be cut clamped in place

The scrap timber clamped to the saw fence guides thickness

Update 64 Gun French Galleon

First layer of Hull planking is progressing well, we have had a lot of rain over the last few days, so the soaked planking is taking a while to dry out. This also affects the drying time of the glue, so much for quickset glue.

My Latest Project a French 64 gun Galleon

Keel and Bulkheads in place

First layer Hull Planking with Gun Ports

Tipper Truck

The dimensions of this project are:
Length 700mm
Width 320mm
Height 300mm
Constructed from: Body 8mm SA Pine Ply Wood, Chassis Canadian Beech, Wheels SA Pine, wheel arches and other trim are Meranti
The plans for this truck will be available for download soon

Sail Boat

The Hull is constructed from 6mm Pine ply wood glue and dowels, the deck planking is Rhodesian Teak, the mast is Canadian Beech and the cabin is 9mm ply and Meranti.The dimensions are:
Length 750mm
Beam 220mm
Draught 80mmm
Mast 670mm
Although this is still a work in progress, I normally build three or four models at a time.
The plans for this Boat will be available for download soon

My very first wooden truck

I cant remember when I built this little truck, it was made from old parquet flooring, which I beleive to be Rhodesian Teak. I have been building wooden toy's for many years, I think it is time to share some of my experience and learn from other model and toy makers from around the world.
The plans for this truck will be available for download soon